Multi-Purpose Wood Preservative, fountain of youth for timber
TimberSafe is the most effective environmental, non-toxic timber preservative known today. The unique attributes of this product is its capacity to provide a holistic solution to timber problems. It is a deep penetrating colourless and odourless liquid absorbed into the timber as if its sap.
The preservation of timber is achieved by addressing the following:
Its main active constituent is boron -one of 109 elements that make up planet Earth. In nature, boron will often combine with oxygen and other elements -commonly called ‘borates’ to indirectly protect against insects without direct injection of poisonous or toxic elements. Being non-biodegradable it will not break-down or lose strength over time and will continue working indefinitely when applied to either new or existing timbers. TimberSafe is non-toxic to humans and all warm-blooded creatures including birdlife and will not harm fish or crustaceans when used in a marine environment. It can be applied without the slightest safety concern while a building is inhabited. It is the only product that satisfied the sensitivity of a Panda Nose for treatment of timber at Taronga Zoo. Other applications include department of Defense, Health, etc. TimberSafe dries to an ‘invisible finish and will not leave stain marks. It will last the entire life of the timber when applied with any of our top coatings such as Stain and Varnish or colour coats.
Approved and tested by the Australian Wool Testing Authority (AWTA) as a fire retardant complying with Australian Standards AS/NZs 1530.3-1999.
AQIS-tested for successful killing and controlling of timber related fungi
Department of Primary Industries (DPI) -QLD Forestry Research Institute tested for outstanding penetration into timber.
Borate has been successfully tested by CSIRO for efficacy against termites, borers, wood-rot (fungi).
Product can be safely sprayed, brushed or rolled even whilst building is inhabited. Can be applied in all weather conditions, wind, heat, cold but not if substrate has been wet previously – if so allow substrate to dry for 12-16 hour s before application. Once TimberSafe has dried it can be painted or stained. Not effective on pre-painted surfaces. Can be applied to garden mulch as both a termite treatment and fire retardant purposes.